Honsberg Duratec (M51)

Bimetal bandsaw blade made of ~ 4% high chrome alloyed tenacious backing material and a HSS cutting edge made of HSS M51 / material No. 1.3207 with a cobalt content of 10% each having a hardness of ~ 69 HRc. The higher alloyed cutting edge is designed to cut high strength steel grades. Higher resistance against thermal and abrasive wear increases the blade life especially cutting long cross sections.

Get a Quote

Categories: Blades, Honsberg

Duplex and heat resistant steels
Nickle-base alloys
Aluminium bronze
Titanium alloys
Case hardened steels, spring steels, quenched and tempered steels
Low alloyed hot-working steels
Nitriding steels, high alloyed hot working steels
Unalloyed tool steels
Cold work steels
High-speed steels
Cast iron
Rust- and acid- resistant steels (light)
Rust- and acid- resistant steels (heavy)
Structural steels, deep drawing steels, machining steels
Structural steels, quenched and tempered steels

Extended service life
Lower cutting cost
Heat resistance and wear resistanceFEATURES
Extremely resistant, stable, tough cutting edge
Innovative, state-of-the-art cutting material: M51

Spectra M42
Blade Width (mm)	Blade Thickness (mm)	Pitch (TPI)
Blade Width (mm)	Blade Thickness (mm)	0.75/1.25	1.1/1.6	1.5/2	2/3	3/4	4/5	4/6
20	0.9mm
27	0.9mm				☑️	☑️	☑️	☑️
34	1.1mm				☑️	☑️		☑️
41	1.3mm			☑️	☑️	☑️		☑️
54	1.6mm		☑️	☑️	☑️	☑️
67	1.6mm	☑️	☑️	☑️	☑️
80	1.6mm	☑️	☑️

*Please contact us if you inquiry for others sizes and pitches

*Please contact us if you inquiry for others sizes and pitches.

Honsberg Duratec (M51)

You may also like…

Amada SGLB HSS BI-Metal Blade

Amada Protector HSS BI-Metal Blade

Amada COBALT8 BI-METAL M42 HSS BLADE

Honsberg Spectra